High Precision Carbide Turning Inserts Lathe Turning Tools For Aluminum Machining
Carbide Turning Inserts
1. Most modern face mills use carbide inserts,as well as many lathe tools and endmills.In recent decades,though solid-carbide endmills have also become more commonly used,wherever the application's characteristics make the pros(such as shorter cycle times)outweigh the cons(mentioned above).
2. Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking.
GRADE TABLE
| Grade | Coated | Application |
| YBC151 | CVD | P05-P20, finishing of P-type material |
| YBC152 | CVD | P05-P20, finishing of P-type material |
| YBC251 | CVD | P10-P30, semi-finishing of P-type material |
| YBC252 | CVD | P10-P35, semi-finishing of P-type material |
| YBC351 | CVD | P20-P40, roughing of P-type material |
| YBM151 | CVD | M05-M30, finishing, semi-finishing and roughing of M-type material |
| YBM153 | CVD | BEST CHOICE for Roughing of M-type material |
| YBM251 | CVD | M10-M30, semi-finishing and roughing of M-type material |
| YBM253 | CVD | M10-M35, semi-finishing and roughing of M-type material |
| YBD052 | CVD | K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron |
| YBD102 | CVD | K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron |
| YBD151 | CVD | K05-K25, finishing of K-type material, semi-finishing of K-type material |
| YBD152 | CVD | K05-K25, finishing and semi-finishing of K-type material |
| YBD252 | CVD | K15-K35, semi-finishing and roughing of K-type material |
| YBG102 | PVD | K01-K10, S10-S20, finishing of K.S-type material |
| YBG105 | PVD | finishing and semi-finishing for materials difficult to cut |
| YBG202 | PVD | P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material |
| YBG205 | PVD | M05-M30, semi-finishing and roughing of M-type material |
| YBG302 | PVD | P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material |
| YNG151 | Uncoated Cermet | P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material |
| YNG151C | Coated Cermet | P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material |
| YC10 | Cemented | P05-P20, finishing of P-type material |
| YC40 | Cemented | P20-P40, rouging of P-type material |
| YD051 | Cemented | K05-K15, finishing of K-type material |
| YD101 | Cemented | N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material |
| YD201 | Cemented | K10-K35, semi-finishing and rouging of K-type material |
Features and benefits
1.Up to 30% higher productivity and profitability.
2.Coated suface enable to get longer tool life.
3.Good abrasion resistance and toughness
Technology:
1.Incorporate latest molding, coating, edge preparation,and other manufacturing technology.
2.Coatings provide highpeed capability and are engineered from finishing to hevy roughing,the ostcoat treatment reduces coating stresses,improves coating adhesion,and improves workpiece finish.
3.Application areas: Machining of cast iron, nonferrous alloy, chill cast iron, hard steel, stainless steeland other non-metallic.
FAQ
Q:What's the payment term?
A:We accept TT, 30% deposit and 70% balance against copy of BL
Q: Tell me the standard of package?
A: For the small capacity, it use carton, but for big capacity, we should use strong wooden case metal drum for protection.
Q: Made by customized drawing or not?
A: We have mold design department. So we could produce goods with our own molds and with your drawing.
Q: Could you offer Form A or C/O ?
A: It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.
Q: Do you make OEM?Would you accept to use our logo?
A: If you have good quantity, it absolute no problem to do OEM . We have laser machine, can . . laser your logo and sizes on the body of products , also can print labels.
Q: Where is your market?
A: Our products are popular in Germany, America, Brazil, India, Russia, Indonesia, Philippines, . . Italy, Pakistan South Africa, Egypt and etc.
Product Tags:
|
|
High Precision Carbide Turning Inserts Lathe Turning Tools For Aluminum Machining Images
|
